Traditional-Scale show draft style hames are available in plain pewter, which can be polished up for a shiny finish.Mix or match your choice of styles of harness brasses to decorate any harness. Brasses are available in silver or gold color.

Harness brasses have long been held as good luck charms, and some even have special meanings and significance.


Harness Hames

Our hames are somewhat flexible so they can be shaped to the collar for a good fit. Sold unfinished, so you can polish and adjust them to fit your model best.

Harness Hames and Brasses

Hames
HM701 - Pewter Hames - Trad. Scale - $13.50/set


Harness Brasses

Add decorative harness brasses to harnesses. The larger size works best with heavy draft-type harnesses, while the smaller/classic size tends to look best for light draft and classic-scale draft harness.

Etched Harness Brasses
Silver Color
All Brasses shown approx. 150%
larger than actual size
Harness Brass HB805s HB805s - Trad. Horsehead Brass - $1.50
pack of 4, silver
Harness Brass HB809s HB809s - Trad. Rosette Brass - $1.50
pack of 4, silver
Harness Brass HB855s HB855s - Clas. Horsehead Brass - $1.25
pack of 4, silver
Harness Brass HB859s HB859s - Clas. Rosette Brass - $1.25
pack of 4, silver
Etched Harness Brasses
Gold Color
All Brasses shown approx. 150%
larger than actual size
Harness Brass HB805g HB805g - Trad. Horsehead Brass - 85¢
pack of 4, gold
Harness Brass HB809g HB809g - Trad. Rosette Brass - 85¢
pack of 4, gold
Harness Brass HB855g HB855g - Clas. Horsehead Brass - 70¢
pack of 4, gold
Harness Brass HB859g HB859g - Clas. Rosette Brass - 70¢
pack of 4, gold



Cast Pewter Terrets

Harness Terrets are used on the "saddle" or surcingle/"belly band" portion of the harness. The reins are threaded through them to keep them in the proper position for driving.

Cast Pewter Terrets
shown approx. 200% larger than actual size
Large Cast Pewter Terret C30 - Large Terret - Cast Pewter $2.50/pair
Small Cast Pewter Terret C31 - Small Terret - Cast Pewter $2.50/pair


Etched Metal Terrets

Harness Terrets are used on the "saddle" or surcingle/"belly band" portion of the harness. The reins are threaded through them to keep them in the proper position for driving.

Etched Terrets
shown approx. 200% larger than actual size
Single Etched Silver Terret HR45s
Single Terret - Silver Color
fits 3/32" straps
$1.20/pair
Double Etched Silver Terret HR46s
Double Terret - Silver Color
fits 3/32" straps
$1.20/pair
Etched Silver Waterhook HR47s
Waterhook - Silver Color
fits 3/32" straps
$1.20/pair

These etched terrets are fastened by poking two matching holes for the "legs" in your leather. Then, thread the "legs" through the baseplate, and then push the "legs" through the holes in the leather. Bend the legs under to secure the terret in place, and glue a layer of skiver under the surcingle to "sandwich" the legs between the layers and protect the model.



Trace Adjustor Buckles

Trace Buckles are used to adjust the length of the traces on a harness.

HR61S

Trace Adjustor Buckles
Silver of Gold Color
shown approx. 200% larger than actual size
**HR61s Trace Adjustor - 1/8" Silver color - $1.00/pair
HR61g Trace Adjustor - 1/8" Gold Color - $1.00/pair
HR60g Trace Adjustor - 1/8" Gold Color - $1.00/pair close-out item
** HR61s/HR61g are a new items, and will replace HR60. It is rounded in shape instead of square. The center trace buckle fits 1/8" lace; the surcingle loops fit 3/32" lace.


For information about how to construct a harness, check out this book:

Guide to Making Model Horse Tack

by Susan Bensema Young



Harness & Driving Bits


Studs and Spots




Check Harness Parts
Pricelist & Availability